MAGURA HC3 MIRROR MOUNT REPLACEMENT PART 2700485

Up for sale is HC3 MIRROR MOUNT REPLACEMENT PART . The vendor part number is 2700485 . Read title carefully to know what you are getting. Catalog description…

Technical details

• Machined Aluminum body this master cylinder body has been produced from high grade aluminum alloy to ensure a lightweight design combined with maximum rigidity which has been built to last.
• 90° full radial design pushrod and cylinder at right angle to handlebar results in decreased friction and more direct brake feeling for improved control.
• Full abs compatibility MAGURA “HCT” is approved for continuous use with all abs systems without loss of performance due to pressure compensation (abs-kickback).
  (status 01.2016)
• 3-way lever ratio the hand activated master cylinder lever has a clever 3 way adjustable point of support. This mimics the effect of using a piston size 1 mm below and above the selected hydraulic ratio. Simply remove and reposition the lever support retaining bolt for a softer or harder pressure point. All 3 positions offer 90° full radial activation.
• Folding lever blade reduces the force exerted on the master cylinder body in the event of a fall over. This will increase the possibility to continue riding following a fall over incident.
• Advanced secondary seal technology the rear piston seal has been specially designed to prevent the introduction of air through secondary seal ingress. The advanced x-ring seal design will reduce or eliminate this problem common on racing motorcycles at higher rpm.
• Reservoir mount the master cylinder is supplied with an external reservoir and mounting bracket designed to use minimum space and with smoked glass to optically determine the level and condition of the brake fluid at all times.
• Titanium retaining bolts lever and clamp retaining bolts are high grade titanium saving weight while remaining strong and durable.

Brake master

• Piston diameter 18 mm = 17 to 19 mm (fully ABE approved)
• Piston diameter 15 mm = 14 to 16 mm (fully ABE approved)
• Piston diameter 12 mm = 11 to 13 mm, short lever blade, without switch and abe (race version)

Clutch master

• Piston diameter 15 mm = 14 to 16 mm (for brake fluid use - dot)
• Piston diameter 12 mm = 11 to 13 mm (for mineral oil use*)

* suitable for use with BMW and KTM mineral oil clutch activation systems.

Items included with delivery each HC³ master cylinder comes ready to install and delivery includes:

• 3-way lever ratio (mimics ±1mm hydraulic ratio adjustment)
• Banjo connector with sealing rings
• Remote reservoir
• Standard clamp (without mirror mount)
• Pre-installed switch (for brake or clutch activation)
• Abe (German TÜV approval) for ø 15 mm and ø 18 mm brake master
• Owner‘s manual

* 12 mm hc3 race version is delivered with a short fold lever without brake light switch.